Counter drone technology

A drone is an unmanned aircraft. Drones are more formally known as unmanned aerial vehicles (UAVs) or unmanned aircraft systems. Essentially, a drone is a flying robot that can be remotely controlled or fly autonomously using software-controlled flight plans in its embedded systems, that work in conjunction with onboard sensors and a global positioning system (GPS).

Counter-drone technology can detect and — when needed — jam, capture, or disable unauthorized drones.

How does counter-drone technology work?

Counter-drone technologies generally fall into two categories: detection and mitigation.


Detection technologies include infrared devices to track heat signatures, radio frequency detection for signals from a drone’s remote controller, and acoustic methods to recognize the unique sounds of drone motors.


Mitigation technologies are those that can repel or intercept a drone. For example, interference signals can jam the communications between the drone and its operator. Other technologies can try to net the drone, shoot it down, or disable it using trained hawks.


What are the challenges facing counter-drone technology?

  • One of the main challenges to current counter-drone technology is that it’s not always effective. For example, detection systems may overlook a drone because of interference or mistake a bird for a drone. And mitigation systems may have a limited range or fail against quick or unpredictable drones.
  • Another challenge is unintended consequences. For example, counter-drone technology may collect personal information or interfere with nearby communications. Systems that disable drones can lead to damage from errant projectiles or falling drones. Therefore, counter drone technology is usually customized to meet a specific purpose and location.
  • A final challenge is the entities that are authorized to deploy this technology.

Technical Challenges Of Counter-Drone Systems (C-UAS)

Today’s counter-drone systems face several technical challenges, primarily because identifying and mitigating threats with currently deployed technologies has proven difficult. Counter-drone technology poses a wide range of challenges, including safety, practicality, policy, legality, and a simple question of effectiveness.

1. Detection Effectiveness
There are flaws in every detection system. Radar systems, for example, may struggle to detect small drones and UAS flying close to the ground. Camera systems may misidentify a drone as a bird or an airplane, and they may struggle in bad weather with low visibility or when the drone is backlit by a strong light source like the sun.

RF sensors’ detection capabilities can be harmed by electromagnetic interference. Communications antennae, two-way radios, telemetry systems, and even power lines and LED lights are potential sources of interference in urban environments.

Certain RF sensors, including some marketed as “passive,” may emit RF signals that could interfere with other communications, making their deployment in some environments potentially dangerous. To detect an intruding drone, radar, or certain RF systems, an EO/IR sensor requires a direct sight line. This could be especially problematic in urban areas, where a drone may only appear for a few seconds before disappearing from the line of sight of a sensor.

Some detection systems may only be able to provide a rough estimate of the location of an incoming drone. With automated tracking algorithms applied to radar or camera data, certain flight patterns—most notably hovering and moving vertically—can make drones harder to detect. Acoustic sensors use a library of sounds emitted by known drones, and RF detection systems use a similar library to only detect specific frequency bands. Given the rapid rate at which drones are introduced to the market and grow in popularity, even frequently updated libraries will never be able to cover all of the drones in use at any given time.

2. False Negatives And False Positives
To be useful, C-UAS detection systems must produce a low number of false negatives and positives. This is a difficult task. All drones operating within the use area must be detected by C-UAS detection elements that are sensitive enough. Too sensitive systems, on the other hand, may generate an excessive number of false positives, rendering the system useless. In cluttered environments, distinguishing true positives from false positives requires “a high level of manpower,” according to FAA counter-drone system testing results.

3. Distinguishing Legitimate And Illegitimate Drone Use
It will become increasingly important for C-UAS operators to distinguish between legitimate and rogue drones in future operating environments where legitimate drone use is common. For example, at a large sporting event, the airspace may be clogged with legitimate aerial cinematography drones and rogue drones posing a security risk. According to one official involved in the operation, the FBI counter-UAS team was “seconds away” from mitigating a drone that turned out to be operating as part of a sanctioned cinematography service during its deployment to the 2019 Super Bowl.

C-UAS operators will need to develop means to quickly and reliably determine the threat level of an incoming UAV based on the limited information provided by existing detection technologies, especially given the potential hazards of mitigating a drone in civilian environments (Remote ID technology may go a long way to addressing this issue once implemented, but it will not be a total fix). This could also be a problem in the military, as a C-UAS system that can’t distinguish between friendly and enemy unmanned aircraft could accidentally shoot down friendly drones.

4. Response Window
Counter-drone operators may only have a few seconds to determine whether or not an incoming drone is malicious. Consider a security team protecting a large public gathering with a counter-drone system with a 750-meter effective identification range and an interdiction element that, if activated, could pose a level of risk to the crowd (see the following section). Assume a drone is flying at 15 meters per second toward the crowd (a fairly standard speed for many commercial systems available on the market today). The team will have less than 50 seconds to decide on an appropriate response in this case. Commercially available drones will become much faster in the coming years as propulsion technologies advance, further reducing the viable response window for C-UAS.

5. Interdiction Hazards
In certain circumstances, many, if not all, counter-drone interdiction techniques can be dangerous. Drones whose flight is disrupted by kinetic means may crash to the ground with a lot of force. Even net-based systems with a parachute to bring the trapped drone down to the ground in a controlled manner can be dangerous if the parachute fails to deploy properly or if the interception occurs at a low altitude. To hit a moving drone, interdiction elements must be extremely precise, and if they miss, they may endanger bystanders. Long-range effectors like lasers and high-powered microwaves could pose a serious threat to aircraft flying above a drone. Meanwhile, jamming systems can disrupt legitimate communications links in their vicinity; for example, if used at an airport, they could disrupt air traffic management operations. In areas where other entities rely on reliable GPS navigation, GPS jamming or spoofing systems are especially dangerous (for example, manned aircraft at an airport).

The cost of anti-drone technology is high. Even though most manufacturers do not publish their price lists, the lack of pricing information suggests that the technology is out of reach for many small businesses looking to protect their airspace. According to a 2019 Sandia National Laboratories study, 77 of the 123 C-UAS products with pricing information were more than $100,000. Two weeks after the Gatwick drone incident, the airport announced that it had already spent more than $6 million on counter-drone systems to prevent future incidents. According to Deutsche Flugsicherung, installing drone detection systems at Germany’s 16 busiest airports would cost more than half a billion euros. Additional costs for personnel training, maintenance, and staff time to operate the counter-drone system are significant.

6. Lack Of Standards
There are no international standards for the proper design and implementation of C-UAS systems. This means there could be significant differences in performance and reliability between systems that appear very similar on the spec sheet. Because the demand for this technology has only recently emerged, many of the products offered by the companies we identified have not yet reached maturity. Some companies appear to be attempting to profit from the growing interest in this technology without properly maturing or field-testing their products. According to US security officials who spoke on the condition of anonymity, many systems actively marketed to US government customers do not perform as advertised. The lack of standards also raises concerns about the systems’ safety. A malfunctioning C-UAS system, particularly in civilian environments, could pose a public safety threat—consider a jamming system that interferes with emergency radio communications or a kinetic system that misses its intended target.

Counter Drone Solutions from MSS Defence

For our current range of Drone Detection and Counter Drone Solutions out of stock please visit our product catalogue. This is not exhaustive and we are more than willing to provide custom solutions if needed. Please send is an email to: or you can go to our contact page.

Translate »